Monthly Payment Disclaimer
CloseThe values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.
Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.
- Pre-owned
- mwagpros
- CT0616PM40
- Tractor
- Utility
If you’re looking for a dependable, well-maintained utility tractor that’s ready to work, this 2017 CASE IH Farmall 75C is an outstanding opportunity. This machine has been meticulously cared for, offers excellent comfort features, and delivers reliable performance for a variety of agricultural and property maintenance applications.
Key Features & Specifications
Only 566 Hours – Low Use
74 Horsepower – Strong, versatile performance for daily tasks
Deluxe Enclosed Cab
Heating & Air Conditioning
Integrated Radio
Air-powered operator seat
Buddy seat for training or extra rider
Work lights for enhanced visibility in low-light conditions
Performance & Capability:
Smooth and efficient 12 x 12 Power Shuttle Transmission
Equipped with Front Loader – Ideal for material handling and property work
Two Hydraulic Remotes for expanded implement versatility
Category 2 Three-Point Hitch with Category 1 bushings for wide implement compatibility
Block heater for reliable cold-weather starting
Service & Maintenance:
Complete 600-hour service just completed, including:
Replacement of all oil and hydraulic filters
New cab air filter
Fresh engine oil and hydraulic fluid
Tractor runs and operates exactly as it should
No mechanical issues
Extremely clean and well-kept unit
Tires are in very good condition
Minor grill damage was professionally repaired
Always maintained with care and stored properly
This tractor is work-ready and offers the comfort, reliability, and performance that operators expect from a premium utility tractor.
- Pre-owned
- CT0616PM40
- 2017
- Case IH
- Farmall 75C
- Tractor
- Utility
- 3.4 L
- Case IH FPT
- Advertised Engine Power, Rated: 74 hp (55 kW) | Maximum: Same as advertised | Power Boost:No boost
- 2300 RPM
- Wastegate turbocharged
- Fan Drive Type: Belt
- Tier 4B / Final | Cleanup Catalyst (CUC): No | Diesel Oxidation Catalyst (DOC): DOC standard
- Selective Catalytic Reduction: No | Exhaust Gas Recirculation (EGR): EGR standard | Pipe: Vertical stack std
- Number: 4
- 207 cu in (3.4 L)
- 3.90 in (99 mm)
- 4.33 in (110 mm)
- 4 Synchronized gears, 2 non-synch ranges | Description: 8x8 Mechanical Shuttle | Speeds: 8F x 8R | Creeper Range Available: no | Shuttle (Forward-Reverse) Available: Standard
- 540 RPM
- Fully independent
- Inboard Planetary
- Front Steer
- High Pressure Common Rail | Control: Electronic | Diesel Particulate Filter (DPF): Particulate Matter Catalyst
- Direct
- Service: Wet disc
- Size, 2WD: 7.50 x 16, 6 ply, F2 | MFD/4WD or Track: 11.2 R24, R1W
- 16.9 R30, R1W
- 2WD / 4WD
- System Rating, Volts: 12 V
- Rating: 120 amp
- Forward: 20.1 mph (32.4 kph)
- System: Open center | Number of Standard Remote Valves: 1 std
- Gear
- Implement Pump: 12.5 gpm (47.5 Lpm)
- Axle Output End, Flange or Bar: Flange | Drawbar: Swinging
- 3-Point Hitch Category: Category 2/1 | Draft Sensing or Lift Control: Top link sensing | Draft Link Ends Telescopic: Yes
- 2WD, incl. Hitch/Drawbar: 153 in (3884 mm) | MFD/4WD or track, incl. Hitch/Drawbar: 151 in (3836 mm)
- to Top of Cab: 98 in (2489 mm)
- 104.5 in (2652 mm)
- with standard wheels or tracks: 83 in (2108 mm) across fenders
- 2WD: 85.8 in (2180 mm) | Trackbase, MFD/4WD or Track: 83.9 in (2132 mm)
- Tank: 23.8 gal (90 L)
- Capacity 24 Inches behind pin: 3,664 lb (1662 kg) OECD| Standard Lift Capacity at lift pin: 4,832 lb (2192 kg)
- 2WD w/ROPS: 5,026 lb (2280 kg) | MFD/4WD w/ROPS: 5,952 lb (2700 kg) | 2WD w/Cab: 5,622 lb (2550 kg) | Total allowable, w/maximum ballast: 7,338 lb (3328 mm)
- 6,239 kg (2830 mm)
- Block Design, Replaceable Liners: Parent bore block
Promotions - 2017 Case IH Farmall 75C
Recommendations
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.